Track query: You can view the movement track of the supervised target within 180 days.
Electronic fence: You can set a virtual electronic fence, and an alarm will be generated when the target enters or leaves the fence.
Remote command control: You can remotely change the working mode and issue relevant commands to control other functions of the device.
ZT06N-V5 is a widely used 4G multi-function positioning terminal. The product supports Beidou dual-frequency high-precision positioning (RTK function is optional) as standard. In addition to satellite positioning, the product also supports indoor positioning technologies such as WiFi positioning and base station positioning, and can still obtain location updates in indoor occasions. The product has a built-in radio frequency interference detection circuit, and an alarm is immediately sent when interference is detected to reach a predetermined value.
• Communication mode LTE Cat-1 network
• Supports Beidou/GPS and other satellite systems.
• Dual-frequency RTK high-precision positioning (optional)*
• Supports WiFi positioning, accurate location can be obtained indoors.
• Supports base station positioning.
• Wide voltage input 9-90V.
• Built-in high-power surge protection circuit.
• Supports relay control.
• LED status indicator.
• Built-in RF interference detection circuit, supports interference fast alarm [optional function].
• Built-in battery supports power failure alarm.
• Built-in vibration sensor, supports intelligent power saving mode.
• Built-in light detection circuit, supports removal alarm.
• Supports 1 RS-232 expansion serial port, or 3.3V UART expansion port (optional)*
• The product uses Bluetooth low-power processor to support the application expansion of our company's various wireless accessories.
• Supports remote firmware upgrade.
Wireless communication specifications
· Communication module type LTE Cat.1
· Frequency band information:
LTE-FDD: B1/B3/B5/B8
LTE-TDD: B34/B38/B39/B40/B41
GPS specifications
· Chip specifications: Beidou dual-frequency.
· RTK function: optional*
· Antenna size: 25x25x4mm dual-frequency antenna.
· Positioning accuracy: 1.5 meters (outdoor open environment).
· Support A-GNSS fast positioning.
Power system
· Support input voltage range: 9- 90V.
· Built-in anti-reverse damage circuit.
· Average working current: less than 30mA (when powered by 12V).
· Support intelligent power saving mode.
· Built-in battery switching circuit supports power-off alarm function.
· Battery specifications: 110mAh high temperature resistant polymer battery.
· Support 2000W surge protection.
Enhanced functions
· Support relay control to achieve remote oil and power off function.
· Support 1 RS-232 communication interface, or 3.3V UART expansion interface.
· Removal alarm, removal alarm based on light detection.
· Built-in Bluetooth BLE main control chip, supports a variety of wireless accessories.
Environmental parameters
· Working temperature: -20 ºC to +70 ºC
· Storage temperature: -40ºC to +85ºC
· Working humidity: 20%-80%
Physical specifications
· Product size: 84x42x13.6mm
· Weight: about 80 grams
1. Personal daily travel, improve convenience.
2. Family car sharing, realize vehicle sharing.
3. Enterprise fleet management, improve management efficiency.
4. Car rental service, simplify the rental process.
+86-13570817400