Contact Contact

Contact Contact

Contact Contact
Language
Contact
×
Contact
Home >  other product >  gps antenna > 
CAR ANTENNA

GNSS&GPS Antenna OEM/ODM -GPS (L1/L5), BDS (B1/B2), GLONASS (L1)

Dimensions(mm)    56.5*61.5*23.0mm³

Selectable connector : SMA/FAKRA

Operating Temperature (℃)    -45~+85

Storage Temperature (℃)    -55~+85

Adhesive Installation, high quality coxial cable & connectors

Operation Environment    Outdoor

Ingress Protection    IP65

Application: Various type of cars

Frequency Range(MHz) :GPS L1/L5、BDS B1/ B2、GLONASS L1

Polarization :Right-hand circular polarization

Application: Positioning and navigation: front and back 

Leave a messageGNSS&GPS Antenna OEM/ODM -GPS (L1/L5), BDS (B1/B2), GLONASS (L1) ContactGNSS&GPS Antenna OEM/ODM -GPS (L1/L5), BDS (B1/B2), GLONASS (L1)
GNSS&GPS Antenna OEM/ODM -GPS (L1/L5), BDS (B1/B2), GLONASS (L1)
GNSS&GPS Antenna OEM/ODM -GPS (L1/L5), BDS (B1/B2), GLONASS (L1)
GNSS&GPS Antenna OEM/ODM -GPS (L1/L5), BDS (B1/B2), GLONASS (L1)
GNSS&GPS Antenna OEM/ODM -GPS (L1/L5), BDS (B1/B2), GLONASS (L1)
GNSS&GPS Antenna OEM/ODM -GPS (L1/L5), BDS (B1/B2), GLONASS (L1)
GNSS&GPS Antenna OEM/ODM -GPS (L1/L5), BDS (B1/B2), GLONASS (L1)
GNSS&GPS Antenna OEM/ODM -GPS (L1/L5), BDS (B1/B2), GLONASS (L1)
GNSS&GPS Antenna OEM/ODM -GPS (L1/L5), BDS (B1/B2), GLONASS (L1)
GNSS&GPS Antenna OEM/ODM -GPS (L1/L5), BDS (B1/B2), GLONASS (L1)

Overview

VLG - Dual band car antenna  Adopted multi-feed point and completely symmetrical structure, which lower the influence of antenna to measurement error while surveying.Antenna has high Gain, with pattern wide beam, with good reception with low elevation signal, insure the normal satellite signal reception even in serious occlusion environment.The Low noise amplifier section adopted pre-filtering scheme to effectively suppress out-of-band interference and improve the reliability of the system.  


This is a high precision car antenna covered GPS L1/L5, BDS 2nd generation B1/ B2, GLONASS L1, it can meet the request of  multi-system compatible and high precision measuring from GNSS surveying equipment. It is widely be used in Geodesy and  mapping, Marine survey, Geological deformation monitoring and other filed. 

Key Features

Antenna adopted multi-feed point and completely symmetrical structure, which lower the influence of antenna to measurement  error while surveying.  


Antenna has high Gain, with pattern wide beam, with good reception with low elevation signal, insure the normal satellite signal  reception even in serious occlusion environment.  


The Low noise amplifier section adopted pre-filtering scheme to effectively suppress out-of-band interference and improve the  reliability of the system.

Specification

Electrical Spec
Frequency Range(MHz)GPS L1/L5、BDS B1/ B2、GLONASS L1  
PolarizationRight-hand circular polarization 
Gain(dBi) (Under 200*200mm base board)Elevation 90°≥4.0 -1dB beam width°≥120° 
Axial Ratio(dB)≤3 
LNA Gain(dB22±2 
Flatness in Band (dB) ±2 
V.S.W.R <2.0 
Noise Figure (dB) <3.0 
DC Voltage (V) 3.0-5.0 
Current (mA) <40 
Impedance(Ω) 50
Mechanical Spec
Dimensions(mm) 56.5*61.5*23.0mm 
Connector Type 3M(cable length) withSMA_J 
Operating Temperature (℃) -45~+85 
Storage Temperature (℃) -55~+85 
Operation EnvironmentOutdoor 
Ingress Protection IP65


GNSS-GPS-antennas

Applications

1716606218551099

GNSS&GPS Antenna OEM/ODM -GPS (L1/L5), BDS (B1/B2), GLONASS (L1)

Have questions?

VLG Technical Consultants are here to assist you!

GNSS&GPS Antenna OEM/ODM -GPS (L1/L5), BDS (B1/B2), GLONASS (L1)+86-13570817400

GNSS&GPS Antenna OEM/ODM -GPS (L1/L5), BDS (B1/B2), GLONASS (L1)Sales@vlg-solution.com

Leave a message

Related Products

Leave a message

VLG Antenna Solution

Contact Us

Need assistance? Contact our sales, engineering, or VLG teams today

Contact

SHENZHEN VLG WIRELESS TECHNOLOGY CO., LTD

SHENZHEN VLG WIRELESS TECHNOLOGY CO., LTD