The High Sierra Sidekick antenna is an antenna designed for mobile
communications and is suitable for a variety of radio devices, including
walkie-talkies, car radios, etc. To ensure that you can correctly install and
use this antenna and give full play to its performance, the following is a
summary of the manual information about the High Sierra Sidekick antenna. Please
note that the specific operating steps and precautions may vary depending on the
specific model of the product, so it is recommended to always refer to the
official user manual that comes with the product.
1. Product Overview
1.1 Main Features
Frequency band support: Generally covers VHF (136 - 174 MHz) and UHF (400 -
520 MHz) bands.
High gain: Provides a higher gain value to enhance signal reception and
transmission capabilities.
Magnetic base: Easy to install on the top of the vehicle or other metal
surfaces, suitable for mobile communication environments.
1.2 Design features
Compact and durable: The design is compact, easy to carry and install, and
has good vibration resistance and durability.
Waterproof and dustproof: With a certain IP protection level, it can adapt
to various weather conditions.
2. Package Contents
Antenna Body
Magnetic Base
RF Connector (SMA or BNC)
Installation Tools and Accessories
User Manual
3. Installation Guide
3.1 Pre-installation Preparation
Choose a location: Place the antenna as high as possible, away from large
metal objects and electronic devices to reduce interference.
Check accessories: Make sure all accessories are complete and
undamaged.
3.2 Installation Steps
Install the Magnetic Base: Attach the Magnetic Base firmly to the top of
the vehicle or other metal surface. Make sure the base is flat and clean for
best adsorption.
Connect the Antenna: Attach the threads at the bottom of the antenna to the
threads on the Magnetic Base and tighten.
Connect the RF Cable: Connect the antenna to your radio device using the
provided RF connector. Make sure the connection is secure and not loose.
Test the Connection: Turn on the radio device and perform a simple
communication test to ensure that the antenna is working properly.
4. Use and Maintenance
4.1 Daily Use
Avoid Collisions: Avoid collisions between the antenna and other objects
while driving.
Regular Inspection: Regularly inspect the antenna and its connections to
ensure that they are not loose or damaged.
4.2 Maintenance
Cleaning: Use a soft cloth to gently wipe the surface of the antenna to
remove dust and dirt.
Storage: When not in use for a long time, the antenna should be stored in a
dry and ventilated place away from direct sunlight.
5. Technical Specifications
Frequency Range: VHF (136 - 174 MHz) and UHF (400 - 520 MHz)
Gain: Typically between 3 dBi and 6 dBi
Standing Wave Ratio (VSWR): Less than 1.5:1
Maximum Power: Typically supports 50 watts or more
Dimensions: Specific dimensions depend on the model
Weight: Lightweight design, easy to carry
6. Troubleshooting
6.1 Weak Signal
Check the installation location: Make sure the antenna is installed as high
as possible and away from interference sources.
Check the connections: Confirm that all connections are secure and not
loose.
Environmental factors: Consider whether the surrounding environment may
affect signal reception (such as buildings, trees, etc.).
6.2 Unable to communicate
Check the power supply: Make sure the radio device is properly turned on
and powered.
Check the channel setting: Confirm that both parties are using the same
channel.
Check the antenna connection: Make sure the connection between the antenna
and the radio device is normal.
7. Safety Tips
Comply with regulations: Make sure that the use complies with the
requirements of local radio communication regulations.
Operational safety: When installing or removing the antenna, be sure to
stop the vehicle and take necessary safety measures.
Avoid contact with high voltage sources: Do not install the antenna near
high-voltage power lines or other potential hazards.
Home >
+86-13570817400
